Facts To Consider When Changing Car Paint Protection Film

Makeover of a car with car paint protection film by changing paint is always soothing. It can be done either by yourself or by professionals. There are a few facts which should be considered before changing car paint. i.e.

• Find Suitable Place

This work needs good ventilation dust free environment, good lighting and electricity. Home garages are not suitable for it as this process requires lots of room. Presence of water heaters can cause ignition of paint fumes during paint.

• Accumulation Of Material Required

Paint, painting equipments, safety   equipment, sanding and polishing tools, etc.

• Prepare for Car Paint Protection Film

Rust and dust are removed from the surface. Dents are meant. Any plastic covering is taken off. If it is difficult to remove, there are tools available in the market for removing such covering.

• Next Step Towards Car Preparation for Painting

Sand the car paint to original primer or to the bare metal so that new paint can adhere to. Apply primer all over metal surface.

• Thorough Cleaning of Car

Clean the surface of the car thoroughly by mineral spirit or denatured alcohol. Make sure no oil speck is left on the surface.

• Proper Covering of Car

Expose only that area that is to be painted and cover the rest of the area with cover and masking tape, as window, door handles, window trims, glass, etc.
Masking tape should be hole free otherwise it will allow the paint to get through.

• Smooth Primered Surface

To smooth paint run, we smother the primer coat carefully enough to not expose the metal surface again.  Now clean the surface again and remove dust and oil drops left during priming.

• Painting The Car

Spray the finished painting on the car. Avoid making the paint too thin, it will reduce gloss.

• Let the Paint Dry

Use of catalyst in paint makes the paint dry to touch in less than 24 hours though full care is taken as long as 7 days. The Car is kept in a dust free environment.

• Finishing Touch

Send final coat of pain until it is perfectly smooth by using 1200 or finer grit wet sandpaper. For higher glossy look, clear coat of pain can be applied. Using 1500 grit wet sandpaper remove small runs, and miner imperfections.

• At Last

Polish is done to bring out a gloss. This can be done by hand or by buffing machines or by power polishers. Better accomplishment is achieved by hand. Power polisher and buffing machines make the job easier. These machines are used with care otherwise they can ruin the paint. For better results buff the edges by hands.

The new color will provide a complete new look to your car, but changing color is an expensive affair. It may cost $1500 to $5000.Low quality work can be done in just $400. But high quality work long lasts, so before opting new look of your car by changing paint check your budget as well.

How to Choose a Paint Protection Film for Your Car?

After taking the decision to get a car paint protection film for your vehicle, the next major decision is to arrive at the best option for your car. Selecting a good film needs a great deal of consideration, based on the aspects of your budget and preferences. There are a variety of options available in the market which includes:

• car paint protection film comes with a ten year guarantee
• Nano-Fusion comes with a lifetime warranty, but at a higher cost
• 3M comes with a strong support from its company and is the cheapest, but it has disadvantages of silvering issues etc.
• Suntek offers a self-healing film but has only 5 years guarantee

So, we see that all options have their own pros and cons. So, the best fit is completely dependent on the owner. Someone might take only the price into consideration while for others it might be the quality or durability. Some offer longer warranties, others come with great customer support, while the rest are simpler to work along with their installer, thus making them cheaper. Most of the new films provide awesome protection, appearance and resilience. So as the owner, you need to set your preferences right and then opt for the best film.

Application Options

After choosing the ideal film, the next step is to decide the type of protection and how to install it on your car. Usually film protection includes covering the complete front or partial front. Full protection will cover the complete hood, mirrors, fenders and front bumper. Partial protection includes the mirrors and bumper, but covers only a part of the fenders and hood. Usually it is advised to go for full front end protection, since it offers complete protection and gives the best look.

 Apart from these generic protection options, some installers offer custom plans, such as- rear bumpers or might be even the full car. Once you decide on a custom protection plan, you need to tell the installer whether you want the ends wrapped or cut along the sides of the section.

Installer Options

The last step involves choosing an excellent film installer. He should have the required expertise and experience to properly install the film on your car. He should ensure to cover each section efficiently, while making the least number of cuts and seams. An inexperienced installer might damage your car if he applies the film inadequately. To ensure getting the best installer you can go for a background check to know about his reputation in the market. Not the costliest installer is the best always!

The whole process of arriving at the best car protection film is complicated, but it is important for the owner. After all, your car is your lifetime companion and it is your duty to ensure that it looks elegant and remains protected during its entire stay with you! So, always choose best Car Paint Protection Film for your vehicle.